Download & Sign Up
Download the ZUS Smart Driving Assistant App to pair the ZUS Smart Vehicle Health Monitor Mini/Lite.
*Please DON'T download the ZUS ELM327 App, if you are not sure, you can click the links below to direct you to the correct App.
iOS Apple Store: https://apps.apple.com/us/app/zus/id1038723291
Android Google Play: https://play.google.com/store/apps/details?id=us.nonda.zus&hl=en
Install Your OBD II Diagnostic Scanner
Pair Your Device with the ZUS AppThe Key Points of Pairing
- Turn on GPS+Bluetooth+Internet on your phone.
- Pair the device with the ZUS app. DO NOT pair ZUS devices in the phone's Bluetooth list!
Make sure the engine is on then click "Pair Now" to start pairing.
*One device can be linked with only one car profile. If you wish to use the device to monitor another car, you need to create another vehicle profile under your ZUS account and go through the pairing process again.
Important Note Before Using
*For Android users, make sure you allow the ZUS App to run in the background, otherwise, it will be recycled by your phone’s operating system. If you don't know how to configure this on your phone, please refer to:
Key Features of ZUS Smart Vehicle Health Monitor Mini
Pro Dashboard, EzzySaver Dashboard & Tiles Dashboard
Safety Center Scan & Clear Error Codes
Decode & Clean Error Codes
After the "Scan" is completed, you can clear the codes if detected.
Car Finder & Mileage
Why can't the device read my vehicle data?
The ZUS app is supposed to show revs, speed, engine load, coolant temperature, and other data on the Pro Dashboard page when your monitor is connected with the app.
The device diagnoses and pulls data from the vehicle using OBD II protocols and, as you may or may not know, car manufacturers apply different kinds of OBD II protocols in different makes and models. We are trying our best to develop and test our products to make the device & app compatible with most vehicles; however, we can't guarantee full coverage.
Please refer to this page to find more troubleshooting if you can't get any readings.
My check engine light is on, but why is the ZUS app scanner not showing any faulty codes?
The Health Monitor reads faulty codes based on world standard OBD-II PIDs, but some manufacturers define many more PIDs specific to their vehicles. Thus, ZUS Smart Vehicle Health Monitor Lite might be not compatible with your car. You may find the incompatible list below:
[Compatibility] ZUS Smart Vehicle Health Monitor Incompatible Vehicle List
If you find your car is on the list, please contact our customer service at firstname.lastname@example.org.
Article is closed for comments.